Support
20" Triple-Zone Crash/Ride on Millenium MPS-1000
Setup — 20" Triple-Zone Crash/Ride on Millenium MPS-1000
WorksYes — the 20" Triple-Zone Crash/Ride works as a full 2-zone crash on the Millenium MPS-1000: bow + edge.
Bow
Edge
Wiring: Crash plug on the multiple cable (Crash1) → cymbal, or 1× TRS → the CRASH2 jack on the rear panel (1/4")
Two dual-zone crash channels: Crash1 on the multiple cable and Crash2 on its own 1/4" jack, wired with the kit's additional jack cable. The EXT jack can take a third cymbal once its trigger type is set to 'Cymbal'.
Crash setup and troubleshooting guide ›Cable routing
- Plug the multiple cable's labelled crash plug into the Lemon cymbal's 1/4" TRS jack.
- For a second crash, connect a 1/4" TRS cable from the cymbal to the CRASH2 trigger jack on the module's rear panel.
- For a third cymbal, use the EXT trigger jack with a 1/4" TRS cable.
Module settings
- Press [SETUP], select 'ADVANCE' and press [ENTER], then hit the cymbal to select it.
- Set 'SENSITIVITY', 'HEADROOM' and 'PEAK DECAY'; select the edge and adjust 'RIM VELOCITY' and 'RIM MODIFIER'.
- For a cymbal on EXT, set 'TRIGGER TYPE' to 'Cymbal' — the factory setting is 'Mesh', which expects a double-trigger drum pad.
Tips
- Crash MIDI notes (bow / edge): Crash1 = 49/55, Crash2 = 57/52.
20" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71