Support
20" Triple-Zone Crash/Ride on Lekato PD708
Setup — 20" Triple-Zone Crash/Ride on Lekato PD708
WorksYes — the 20" Triple-Zone Crash/Ride works as a full 2-zone crash on the Lekato PD708: bow + edge.
Bow
Edge
Wiring: 1× TRS → TRIGGER IN 5/6 or 7/8 — bow + edge
Dual-zone crash triggering on the jacks Lekato designates for cymbals: "5/6 and 7/8 are used for connecting a dual zone cymbal" (User Manual p.7). Bow and edge arrive on the jack's two triggers over one TRS cable and each plays its own sound. The manual says nothing about choke, so none is claimed here.
Crash setup and troubleshooting guide ›Cable routing
- Connect a TRS cable from the Lemon cymbal to TRIGGER IN 5/6 or 7/8.
Module settings
- Open the SYSTEM menu, go to PAD SETUP and hit the cymbal to select its trigger.
- On PAGE 1, set SENSITIVITY and THRESHOLD for the bow and the edge.
- In the PAD menu, hit the bow and choose a crash sound under Wave, then hit the edge and assign its sound.
Tips
- Bow and edge respond independently.
- Two cymbal jacks exist, so a crash and the ride together use both.
20" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71