Support
11" Dual-Zone Splash/Crash on Alesis Strata Core
Setup — 11" Dual-Zone Splash/Crash on Alesis Strata Core
WorksYes — the 11" Dual-Zone Splash/Crash works as a full 2-zone crash on the Alesis Strata Core: bow + edge.
Bow
Edge
Wiring: C1/C2 on the cable snake → cymbal, or 1× TRS → C3 on the Cymbal 3 rear-panel jack
Each Cymbal slot reads bow + edge with choke support, tuned with Bow Sensitivity, Edge Sensitivity, and Threshold. C1–C2 land on the cable snake; C3 is one of the two dedicated 1/4" TRS jacks Alesis puts on the rear panel — "Tom 4 and Cymbal 3 Trigger Inputs (1/4" TRS)" (User Guide p.10).
Crash setup and troubleshooting guide ›Cable routing
- Plug the C1 or C2 trigger on the cable snake into the cymbal.
- For a third crash, connect a 1/4" TRS cable from the cymbal to the Cymbal 3 (C3) trigger input on the rear panel — a dedicated 1/4" TRS jack (User Guide p.10).
Module settings
- Press the Kit button, then tap Trigger to open Trigger Mode.
- Tap Hit Select and strike the cymbal to select its slot (C1–C3).
- Load a crash preset, then open Tweaks to set Bow Sensitivity, Edge Sensitivity, and Threshold.
- If edge hits play a bell sound, toggle Invert Bell & Edge in Advanced.
Tips
- Bow plays from the main surface; edge triggers from the edge sensor, and grabbing the edge chokes the cymbal.
- If chokes are too easy or too slow, open Advanced and adjust Choke Time (1–200 ms).
11" Dual-Zone Splash/Crash also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71