Support

T950 13"x13" Floor Tom on Alesis Command

Wiring, module settings, and tips for the T950 13"x13" Floor Tom when used with the Alesis Command.

Yes — the T950 13"x13" Floor Tom works as a full tom on the Alesis Command: head + rim.

Head Rim

Wiring: 1× TRS per tom → Tom1, Tom2, Tom3 connectors on the cable snake

The tom connectors on the cable snake support dual-zone (head + rim) triggering via the center piezo and the rim piezo.

Connect a 1/4" TRS cable from each tom pad to the Tom1, Tom2, or Tom3 connector on the cable snake.

Go to Kit > Menu > Trigger. Select the Tom input.
Adjust Sensitivity, Threshold, Curve, and Rim Sens.
Leave Head-Rim Adj low — it reduces crosstalk between head and rim rather than balancing them, and a high value can silence a deliberate head-and-rim hit.
Press Save to keep the changes — otherwise they are lost when you power off the drum module.

Head triggers from the center piezo, rim from a second piezo on the ring.
Both zones respond independently on the TRS connection (tip = head, ring = rim).

T950 13"x13" Floor Tom also fits 74 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.