Support

20" Triple-Zone Crash/Ride on Yamaha DTX-PRO

Wiring, module settings, and tips for the 20" Triple-Zone Crash/Ride when used with the Yamaha DTX-PRO.

Yes — the 20" Triple-Zone Crash/Ride works as a full 2-zone crash on the Yamaha DTX-PRO: bow + edge.

Bow Edge

Wiring: 1× TRS → CRASH1 or CRASH2 input (individual rear-panel 1/4" stereo TRS jack)

The DTX-PRO reads 2-zone cymbals (bow + edge) on its CRASH1 / CRASH2 stereo TRS jacks — the manual lists these jacks as supporting single-piezo 3-zone cymbal pads (bow + edge/bell sensor switches), so a Lemon 2-zone crash lands its bow and edge zones. Set the cymbal pad type so both zones register.

Cable routing

Connect the cymbal to the CRASH1 or CRASH2 input with a standard 1/4" TRS cable.
The DTX-PRO has individual rear-panel trigger jacks: KICK, SNARE, TOM1-3, HI-HAT, HH CTRL, CRASH1, CRASH2, RIDE.

Module settings

Press the [MENU] button, select Trigger, then Pad Type.
Strike the crash so its trigger input (CRASH1 or CRASH2) is selected.
Set PadType to a 2-zone cymbal type so the bow and edge register separately.
Adjust the bow gain and sensitivity; use RejectTime (MENU/Trigger/Pad Type/RejectTime) and Crosstalk (MENU/Trigger/Crosstalk) to reject double and false triggers.

Tips

Set the pad type to a 2-zone cymbal so bow and edge register separately.

20" Triple-Zone Crash/Ride also fits 73 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.