Support
T550 10" Low Tom on Simmons SD1500
Setup — T550 10" Low Tom on Simmons SD1500
WorksYes — the T550 10" Low Tom works as a full tom on the Simmons SD1500: head + rim.
Head
Rim
Wiring: The "To Tom 1"–"To Tom 3" branches of the multi-pin cable harness → one per tom pad (a fourth tom: 1× TRS → the side-panel TOM 4 jack)
The tom inputs support dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the "To Tom 1", "To Tom 2" or "To Tom 3" branch of the multi-pin cable harness into each tom pad.
- A fourth tom connects with a 1/4" TRS cable to the 1/4" TOM 4 trigger input on the module's side panel.
Module settings
- Press [UTILITY], then [MENU] to open Trigger Setup.
- Select the Tom input (strike the pad or use its Pad Select button).
- Step with [PAGE -/+] and adjust Sensitive, Thresh, Curve, Retrig-C, X-Talk, Splash-S.
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T550 10" Low Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71