Support

T550 10" Low Tom on Alesis Strike MultiPad

Wiring, module settings, and tips for the T550 10" Low Tom when used with the Alesis Strike MultiPad.

The T550 10" Low Tom is fully supported on your Alesis Strike MultiPad.

Head Rim

Wiring: 1× TRS → Trigger In 2/3 or 4/5 set to Head+Rim — head + rim

Each 2-zone tom needs one of the two dual-zone jacks (Trigger In 2/3 or 4/5) set to Type = Head+Rim, carrying head + rim over a single TRS cable. There are only two dual-zone jacks total, shared across all your 2-zone pads. To add more single-zone pads, a dual-zone jack can instead be set to 2 Trigger and split with a TRS-to-dual-TS Y-cable, but each Y-cable leg is single-zone (head only).

Cable routing

Connect a 1/4" TRS cable from each Lemon tom pad to a free dual-zone jack (Trigger In 2/3 or 4/5).

Module settings

Press [Trigger], select the tom's trigger input (TRIN2–5) and set Type to Head+Rim.
Tune Sensitivity, Scan Time, Retrig-C and Mask Time, and set Rim Gain for the rim zone.
Assign tom head and rim samples to that trigger input.

Tips

Only two dual-zone jacks exist — a full 2-zone snare + tom already uses both.
For a single-zone tom, set a jack to 2 Trigger and use a TRS-to-dual-TS splitter to reach two mono triggers on one jack.

T550 10" Low Tom also fits 70 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.