Support
T550 10" Low Tom on Alesis DM7X
Setup — T550 10" Low Tom on Alesis DM7X
WorksYes — the T550 10" Low Tom works as a full tom on the Alesis DM7X: head + rim.
Head
Rim
Wiring: Tom1, Tom2, Tom3 connectors on the cable snake → one per tom pad
The tom connectors on the cable snake support dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the Tom1, Tom2, or Tom3 connector on the cable snake into each tom pad.
Module settings
- Hit the tom pad, or press its Pad Select button, so the module selects that input.
- Press Utility, then press Page/Select until SEN (Pad sensitivity) appears, and set it with the < and > buttons.
- Press Page/Select until THR (Pad threshold) appears, and set it with the < and > buttons.
- Press Page/Select until R-S (Pad rim sensitivity) appears, and set the rim response with the < and > buttons.
- Press Save to keep the settings — otherwise they return to defaults when you power the module off.
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T550 10" Low Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71