Support
T550 10" Low Tom on GEWA G5
Setup — T550 10" Low Tom on GEWA G5
WorksYes — the T550 10" Low Tom works as a full tom on the GEWA G5: head + rim.
Head
Rim
Wiring: 1× TRS per tom → TOM 1, TOM 2, TOM 3 inputs (1/4" TRS jacks)
The tom inputs support dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Snare and tom setup and troubleshooting guide ›Cable routing
- Connect a 1/4" TRS cable from each tom pad to the TOM 1, TOM 2, or TOM 3 input on the rear panel.
Module settings
- Press the [TRIGGER SETTINGS] button to enter Trigger Settings mode.
- Turn the dial [5] [<INPUT>] to select the TOM 1, TOM 2 or TOM 3 input.
- Press [F1] "Settings".
- Turn the dial [6] [<ZONE>] to choose the zone (HEAD or RIM).
- Turn the dial [5] to Gain and set it with the dial [7] so your hardest stroke reaches full velocity, then do the same for Threshold so light knocks are ignored.
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- Both zones share the one TRS connection (tip = head, ring = rim).
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T550 10" Low Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71