Support
T550 10" Low Tom on Donner DED-500P
Setup — T550 10" Low Tom on Donner DED-500P
Use as 1-zone tomYes — the T550 10" Low Tom works on the Donner DED-500P as a 1-zone tom: head only.
Head
Rim
Wiring: TOM1/TOM2/TOM3 leads on the Data In (DB25) harness → one per tom pad; Tom 4: 1× TRS → the discrete TOM4 expansion jack
The DED-500P manual does not confirm dual-zone tom inputs; conservatively treated as single-zone. Only the head zone will trigger; rim hits will not produce a separate sound.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the TOM1, TOM2, or TOM3 lead on the module's DB25 signal-connection harness into each tom pad (the harness plugs into the module's "Data In" port).
- For a fourth tom, connect a 1/4" TRS cable from the pad to the discrete TOM4 1/4" jack on the module's jack panel.
Module settings
- Upon the setting interface, select TRIG and press [ENTER] to enter the trigger interface, then use the [◀]/[▶] buttons to select the Tom pad.
- Adjust Sensitivity, Threshold, Curve, and Rim Gain for the rim zone.
Tips
- Only the head (center piezo) triggers — this module doesn't read the pad's rim piezo.
T550 10" Low Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71