Support

T550 10" Low Tom on GEWA G9

Wiring, module settings, and tips for the T550 10" Low Tom when used with the GEWA G9.

Yes — the T550 10" Low Tom works as a full tom on the GEWA G9: head + rim.

Head Rim

Wiring: 1× TRS per tom → TOM 1–TOM 4 inputs (1/4" TRS jacks)

The tom inputs support dual-zone (head + rim) triggering via the center piezo and the rim piezo.

Snare and tom setup and troubleshooting guide ›

Cable routing

Connect a 1/4" TRS cable from each tom pad to a TOM 1–TOM 4 input on the rear panel.

Snare and tom setup and troubleshooting guide ›

Module settings

Tap the [Advanced] button and open Trigger Settings mode.
In the Input Channels list, select the tom (TOM 1-TOM 4); tap its component icon (Head or Rim) in the Trigger Selection panel.
In the Trigger Settings panel, adjust Gain, Threshold, High Level, Scan Time, Retrigger Mask, X-Talk, Dyn Time and Dyn Level.
In the Advanced Settings panel, set the Trigger Type to Dual for the head and the rim component to Piezo — p.96: "For pads with 2 piezos for triggering Head and Rim, choose Dual for the Head and Piezo for the Rim."

Tips

Head triggers from the center piezo, rim from a second piezo mounted under the head.
Both zones share the one TRS connection (tip = head, ring = rim).
On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.

T550 10" Low Tom also fits 76 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

Lekato

Lekato PD708

Millenium

Millenium MPS-1000

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.