Support
T550 10" Low Tom on Pearl Mimic Pro
Setup — T550 10" Low Tom on Pearl Mimic Pro
WorksYes — the T550 10" Low Tom works as a full tom on the Pearl Mimic Pro: head + rim.
Head
Rim
Wiring: 1× TRS per tom → the TOM 1–TOM 4 inputs (1/4" TRS jacks)
The tom inputs support dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Snare and tom setup and troubleshooting guide ›Cable routing
- Connect a 1/4" TRS cable from each tom pad to a TOM 1, TOM 2, TOM 3 or TOM 4 input on the rear panel.
Module settings
- Set the tom inputs' trigger gain and threshold from the Pearl Mimic Pro's own trigger menu — see the Pearl Mimic Pro manual for the exact menu path and parameter names.
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- Both zones share the one TRS connection (tip = head, ring = rim).
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T550 10" Low Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71