Support
18" Triple-Zone Crash/Ride on NUX DM-8
Setup — 18" Triple-Zone Crash/Ride on NUX DM-8
Use as 2-zone rideYes — the 18" Triple-Zone Crash/Ride works on the NUX DM-8 as a 2-zone ride: bow + edge.
Choose your ride zones
Plug: Ride 1
Wiring: RIDE branch on the multi-pin trigger snake → Ride 1 (bow/edge)
Plug the RIDE branch into the Lemon ride's Ride 1 output for bow + edge — no cymbal modification. The ride's second zone is assignable, so give it a ride-edge or crash voice.
Ride setup and troubleshooting guide ›Cable routing
- Plug the RIDE branch of the trigger snake into the ride's Ride 1 output (bow/edge).
Module settings
- Press MENU > TRIGGER and hit the ride to select it.
- Tune SENSITIVITY / THRESHOLD for the bow and RIM GAIN for the ring (edge) zone.
- If edge hits sound the wrong voice, reassign the ride notes under MENU > MIDI NOTE.
Tips
- This is the out-of-the-box setup — no cymbal modification.
Or set it up as Bow + bell
Plug: Ride 2
Wiring: RIDE branch on the multi-pin trigger snake → Ride 2 (bow/bell, after the rewire)
After a one-time, reversible jumper move inside the cymbal (~10 min) the Ride 2 output carries bow + bell into the single RIDE branch.
Rewire guide ›Cable routing
- Rewire the cymbal — move the internal red/black jumper from the Ride 1 input to the Ride 2 input.
- Plug the RIDE branch of the trigger snake into the cymbal's Ride 2 output.
Module settings
- Press MENU > TRIGGER and hit the ride to select it.
- Tune SENSITIVITY / THRESHOLD for the bow and RIM GAIN for the ring (bell) zone.
- If bell hits sound the wrong voice, reassign the ride notes under MENU > MIDI NOTE — bow and bell play through the single connected lead.
18" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71