Support
13" Triple-Zone Crash/Ride on Roland SPD-SX PRO
Setup — 13" Triple-Zone Crash/Ride on Roland SPD-SX PRO
WorksThe 13" Triple-Zone Crash/Ride is fully supported on your Roland SPD-SX PRO.
Bow
Edge
Wiring: 1× TRS → a TRIGGER IN jack set to HEAD&RIM — bow + edge
Dual-zone crash triggering: bow (tip) and edge (ring) read independently over one TRS cable when the jack is set to HEAD&RIM, and choke works by grabbing the edge. The SPD-SX PRO supports Roland CY-series 2-zone cymbals. Each 2-zone cymbal occupies one of the four jacks.
Cable routing
- Connect a 1/4" TRS cable from the Lemon cymbal to a free TRIGGER IN jack (1/2, 3/4, 5/6 or 7/8).
Module settings
- Press [MENU] > SYSTEM > PAD/TRIG IN > [F1] (PARAM) and select the cymbal's trigger input.
- Set Input Mode to HEAD&RIM and Trig Type to a CY-series profile such as CY-13R or CY-14C.
- Assign bow and edge waves to the trigger's head and rim in KIT EDIT.
Tips
- Bow and edge respond independently; choke by grabbing the edge.
- Connect a second crash to another free jack — up to four 2-zone pads fit across the four jacks.