Support

11" Dual-Zone Splash/Crash on Simmons Titan 75

Wiring, module settings, and tips for the 11" Dual-Zone Splash/Crash when used with the Simmons Titan 75.

Yes — the 11" Dual-Zone Splash/Crash works as a full 2-zone crash on the Simmons Titan 75: bow + edge.

Bow Edge

Wiring: 1× TRS → EXP1 or EXP2 (1/4" dual-zone input) on the back panel

Dual-zone cymbal triggering runs through the EXP1 and EXP2 inputs on the back panel — the manual describes them as being for additional dual-zone pads, and each sends its own center and rim MIDI note. The two crash branches of the cable harness are single-zone (one MIDI note each), so connect Lemon 2-zone cymbals to EXP1/EXP2 for bow and edge; a third and fourth cymbal can still go to the harness crash branches as bow-only.

Crash setup and troubleshooting guide ›

Cable routing

Connect a 1/4" TRS cable from the cymbal pad to EXP1 or EXP2 on the back panel.

Crash setup and troubleshooting guide ›

Module settings

Press SETUP repeatedly until you reach EXP1 (or EXP2) and set that port to "Crash" — a Lemon 2-zone cymbal is a piezo bow with a switched edge, and Crash is the setting the manual gives for a switched edge; "Tom" is for a dual-piezo pad.
Press the SETUP button, then strike the cymbal pad to select it — use the LEDs to the right side of the display to see which pad is selected for editing.
Press SETUP repeatedly to step through Sens, Retrigger, Threshold, Curve, and X-Talk for that input.

Tips

Use EXP1 or EXP2 for bow + edge — the crash branches on the cable harness read the bow zone only.
The Lemon 2-zone cymbal is one TRS cable: tip = bow piezo, ring = edge switch.

11" Dual-Zone Splash/Crash also fits 76 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

Lekato

Lekato PD708

Millenium

Millenium MPS-1000

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.