Support

11" Dual-Zone Splash/Crash on GEWA G3

Wiring, module settings, and tips for the 11" Dual-Zone Splash/Crash when used with the GEWA G3.

Yes — the 11" Dual-Zone Splash/Crash works as a full 2-zone crash on the GEWA G3: bow + edge.

Bow Edge

Wiring: 1× TRS → Crash or AUX input (1/4" TRS jack)

Full dual-zone cymbal support with bow and edge.

Connect to the CRASH 1 input or an AUX input using a standard 1/4" TRS cable.
All trigger inputs are individual 1/4" TRS jacks — rear panel: AUX 2, AUX 1, CRASH 1, HH CTRL, HI-HAT, RIDE, TOM 3, TOM 2, TOM 1, SNARE, KICK.

Press the [TRIGGER SET.] button to enter Trigger Set mode.
Turn the dial [5] [<INPUT>] to select the CRASH or AUX input the cymbal is plugged into.
Press [F2] "Setup" to set the pad type for that input (Example: Cymbal = Edge, Bow, Bell).
Press [F1] "Settings", use the dial [6] [<ZONE>] to choose BOW or EDGE, and adjust Threshold, Gain and the other parameters with the dials [5]/[7].

11" Dual-Zone Splash/Crash also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.