Support

18" Triple-Zone Crash/Ride on Alesis Strike MultiPad

Wiring, module settings, and tips for the 18" Triple-Zone Crash/Ride when used with the Alesis Strike MultiPad.

The 18" Triple-Zone Crash/Ride is fully supported on your Alesis Strike MultiPad.

Bow Edge

Wiring: 1× TRS → Trigger In 2/3 or 4/5 set to Head+Rim — bow + edge

Dual-zone crash triggering: with a dual-zone jack (Trigger In 2/3 or 4/5) set to Type = Head+Rim, bow (head) and edge (rim) read independently over one TRS cable, and choke works by grabbing the edge. Each 2-zone cymbal occupies one of the two dual-zone jacks, so they're shared with any 2-zone snare/tom/ride you connect.

Cable routing

Connect a 1/4" TRS cable from the Lemon cymbal to a free dual-zone jack (Trigger In 2/3 or 4/5).

Module settings

Press [Trigger], select the cymbal's trigger input (TRIN2–5) and set Type to Head+Rim.
Tune Sensitivity, Scan Time and Retrig-C, and set Rim Gain for the edge zone.
Assign bow and edge samples to the head and rim of that trigger input.

Tips

Bow and edge respond independently; choke by grabbing the edge.
Both dual-zone jacks can host a 2-zone cymbal, but that leaves none for a 2-zone snare or tom.

18" Triple-Zone Crash/Ride also fits 70 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.