Support
18" Triple-Zone Crash/Ride on Alesis Crimson II
Setup — 18" Triple-Zone Crash/Ride on Alesis Crimson II
WorksYes — the 18" Triple-Zone Crash/Ride works as a full 2-zone crash on the Alesis Crimson II: bow + edge.
Bow
Edge
Wiring: Crash 1 connector on the cable snake → cymbal, or 1× TRS → Crash 2 jack on the rear panel
Same platform as the Command. Crash 1 is on the cable snake (TRS). Crash 2 is a ¼″ TRS jack on the rear panel. Both support 2-zone operation.
Crash setup and troubleshooting guide ›Cable routing
- Plug the Crash 1 connector on the cable snake into the cymbal.
- Alternative: Connect a ¼″ TRS cable from the cymbal to the Crash 2 jack on the rear panel.
Module settings
- Go to Kit → Menu → Trigger. Select the Crash input.
- Adjust Sensitivity, Threshold, Curve, and Rim Sens.
- Press Save to keep the changes — otherwise they are lost when you power off the drum module.
Tips
- Xtalk parameter can reduce false triggers from nearby pads.
- Retrig Cancel helps prevent double triggering on hard strikes.
18" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71