Support
Setup for your GEWA G3
Yes — Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the GEWA G3.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 2-zone
- Ride 3-zone
- Hi-hat Continuous
Module snapshot
- Brand
- GEWA
- Model
- G3
- Also known as
- G3, GEWA G3
Setup details by role
Snare pad 2-zone 1× TRS → SNARE input (1/4" TRS jack)
The snare input supports dual-zone (head + rim) triggering via center piezo and rim switch.
Tom pad 2-zone 1× TRS per tom → TOM 1, TOM 2, TOM 3 inputs (1/4" TRS jacks)
The tom inputs support dual-zone (head + rim) triggering via center piezo and rim switch.
Kick pad Works 1× TS or TRS → KICK input (1/4" TRS jack)
Single-zone kick trigger. Only the head zone is active.
2-zone crash 2-zone 1× TRS → Crash or AUX input (1/4" TRS jack)
Full dual-zone cymbal support with bow and edge.
3-zone ride 3-zone 2× TRS: bow/edge → AUX1 input, bow/bell → AUX2 input (the 3-Way pair)
Full 3-zone ride via GEWA's 3-Way trigger type. On this module the 3-Way pair is fixed to AUX1 + AUX2 — AUX1 reads bow/edge and AUX2 reads the bell. The RIDE jack is not part of it and stays free for another cymbal.
Hi-hat Continuous 1× TRS pad → HI-HAT input + 1× TRS pedal → HHctrl input (1/4" TRS jacks)
GEWA supports third-party hi-hat pads via its trigger presets, and the panel has a dedicated 1/4" TRS hi-hat-control jack (HHctrl; spec "HI-HAT CONTROL: 1× ¼" TRS socket", p.144) that the Lemon bottom-plate controller plugs straight into. An open/close calibration wizard ([F3] HH-CALIB., p.29) sets the pedal range for open, closed and half-open response.
