Support
T950 13"x13" Floor Tom on Yamaha DTX700
Setup — T950 13"x13" Floor Tom on Yamaha DTX700
Use as 1-zone tomYes — the T950 13"x13" Floor Tom works on the Yamaha DTX700 as a 1-zone tom: head only.
Head
Rim
Wiring: 1× TRS per tom → TOM1, TOM2, TOM3 inputs (1/4" TRS jacks)
The TOM1-TOM3 jacks take stereo-type two- or three-zone pads (Owner's Manual p.12), and the module's tom pad types are Yamaha's own XP and TP models (Reference Manual p.46). A Lemon tom's rim is a second piezo, which these inputs do not register as a rim hit, so they read the head only.
Cable routing
- Connect a 1/4" TRS cable from each tom pad to the TOM1, TOM2, or TOM3 input on the rear panel.
Module settings
- Press the [MENU] button, turn the dial to select Trigger, then press the dial.
- Turn the dial to select Pad, then press the dial; strike the tom so its input is selected.
- Move the cursor to the PadType row and set the entry that matches your tom — the Reference Manual prints XP120/100 Tom, XP80 Tom, XP70 Tom, TP120/100 Tom and TP65S Tom (p.46).
- Set Gain (1–64) on the same Pad Type page for even response across the tom (p.46).
- Raise MinLevel (Minimum Level, 0%–99%) to reject false hits, and adjust RejectTime (4ms–500ms) to stop double triggers.
- Press the [STORE] button to store the setting — if a confirmation message appears, press the dial to proceed.
Tips
- Only the head (center piezo) triggers — this module doesn't read the pad's rim piezo.
T950 13"x13" Floor Tom also fits 74 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71