Support
T950 13"x13" Floor Tom on Efnote 7
Setup — T950 13"x13" Floor Tom on Efnote 7
WorksYes — the T950 13"x13" Floor Tom works as a full tom on the Efnote 7: head + rim.
Head
Rim
Wiring: 1× TRS per tom → TOM1 or TOM3 leads on the MULTI-A breakout cable
The tom inputs support dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Cable routing
- Connect a 1/4" TRS cable from each tom pad to the TOM1 or TOM3 lead on the MULTI-A breakout cable — the module has no 1/4" trigger jacks of its own (Quickstart Guide p.10).
Module settings
- In the Trigger menu's PAD screen, select the tom Input.
- Adjust Sens and Threshold; Sens B adjusts the rim zone.
- If rim sounds trigger when you strike the head, adjust Head-Rim Border.
- Use the X-TALK ELIM. screen if hits on other pads falsely trigger this one.
Tips
- Head triggers from the center piezo, rim from a second piezo on the ring.
- Both zones respond independently on the TRS connection (tip = head, ring = rim).
- This model's connection diagram labels TOM1 and TOM3 only; the module addresses four tom inputs, and the TOM4 lead is on the MULTI-B breakout cable (Quickstart Guide p.11). For a third tom, use TOM4.
T950 13"x13" Floor Tom also fits 74 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71