Support

T950 13"x13" Floor Tom on 2Box DrumIt 5 MKII

Wiring, module settings, and tips for the T950 13"x13" Floor Tom when used with the 2Box DrumIt 5 MKII.

Yes — the T950 13"x13" Floor Tom works as a full tom on the 2Box DrumIt 5 MKII: head + rim.

Head Rim

Wiring: 1× TRS per tom → TOM1, TOM2, TOM3 inputs (1/4" TRS jacks)

The tom inputs support dual-zone (head + rim) triggering via center piezo and rim switch.

Connect a 1/4" TRS cable from each tom pad to the TOM1, TOM2, or TOM3 input on the rear panel.

Go to UNIT mode and page to the UNIT-TRIG page (PAGE UP / PAGE DOWN).
Select the TOM channel by hitting the tom pad or with the CHANNEL UP / CHANNEL DOWN buttons.
Set TYPE to the matching 2-zone pad type (e.g. PadPS).
Set GAIN so all LED-meter segments light on the hardest hit.
Set THRES for the lightest stroke you want to register (range -48 to -18 dB).
Set XTALK (Off / Low / Med / High) to suppress cross-talk from adjacent pads.
Set CURVE to match your playing dynamics.

Head triggers from the center piezo, rim triggers from the rim switch.
Both zones respond independently on the TRS connection (tip = head, ring = rim).

T950 13"x13" Floor Tom also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.