Support
T950 13"x13" Floor Tom on Roland TD-11
Setup — T950 13"x13" Floor Tom on Roland TD-11
WorksYes — the T950 13"x13" Floor Tom works as a full tom on the Roland TD-11: head + rim.
Head
Rim
Wiring: TOM1, TOM2, TOM3 connectors on the DB-25 cable snake → one per tom pad
Dual-zone tom triggering: head (tip) and rim (ring) are read over the one lead per tom input.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the TOM1, TOM2, or TOM3 connector on the DB-25 cable snake into each tom pad.
Module settings
- In the DRUM KIT screen, press [MENU], scroll to the SYSTEM icon, and press [F3] (SYSTEM).
- Use the cursor buttons to select "Pad Settings", press [F3] (ENTER), then press [F1] (TYPE).
- Strike a tom to select its input, then set "Pad Type" to PD-85 or PD-105 to match your tom.
- Press [F2] (BASIC) to fine-tune "Sensitivity" (1-32) and "Threshold" (0-31).
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T950 13"x13" Floor Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71