Support
T950 13"x13" Floor Tom on Donner DED-200
Setup — T950 13"x13" Floor Tom on Donner DED-200
Use as 1-zone tomYes — the T950 13"x13" Floor Tom works on the Donner DED-200 as a 1-zone tom: head only.
Head
Rim
Wiring: Tom1, Tom2, Tom3 connectors on the cable harness → one per tom pad
The DED-200 tom inputs are single-zone. Only the head zone will trigger; rim hits will not produce a separate sound.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the Tom1, Tom2, or Tom3 connector on the cable harness into each tom pad.
Module settings
- In DRUM KIT mode, press MENU, use the encoder or UP/DOWN to select SENSITIVITY, then press ENTER.
- Press UP/DOWN to pick a parameter, tap the tom pad to select it (shown as TO1, TO2, or TO3), and turn the encoder to set the value.
- Set SEN (drum sensitivity, 01-06) so your normal stroke registers at full volume.
- Set THREH. (trigger threshold, 01-32) so light knocks don't trigger the pad.
- Raise XTALK (crosstalk threshold, 01-32) if a neighbouring pad false-triggers this one, and RETR. (repeat trigger, 01-32) if you get double triggers.
- Set VOL (volume, 00-127) to balance the pad against the rest of the kit.
- Press SAVE to store the settings.
Tips
- Only the head (center piezo) triggers — this module doesn't read the pad's rim piezo.
T950 13"x13" Floor Tom also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71