Support

T950 13"x13" Floor Tom on Donner DED-300X

Wiring, module settings, and tips for the T950 13"x13" Floor Tom when used with the Donner DED-300X.

Yes — the T950 13"x13" Floor Tom works as a full tom on the Donner DED-300X: head + rim.

Head Rim

Wiring: TOM1/TOM2/TOM3 leads on the signal-connection harness → one per tom pad; Tom 4: 1× TRS → TOM4 jack on the rear panel (1/4" TRS)

All four tom channels are dual-zone — head and rim both trigger as separate MIDI notes. Toms 1-3 connect through the signal-connection harness; Tom 4 uses the dedicated TOM4 expansion jack on the rear panel.

Snare and tom setup and troubleshooting guide ›

Cable routing

Plug the TOM1, TOM2, or TOM3 lead on the module's signal-connection harness into each tom pad (the harness plugs into the module via its multi-pin parallel-port connector).
For a fourth tom, connect a 1/4" TRS cable from the pad to the discrete TOM4 1/4" jack on the module's rear jack panel.

Snare and tom setup and troubleshooting guide ›

Module settings

MENU > SENSITIVITY > select T01, T02, or T03 > set SEN (drum sensitivity, 01-06), THREH. (trigger threshold, 01-32), XTALK (crosstalk threshold, 01-32), RETR. (repeat trigger, 01-32), and VOL (volume, 00-127).
Press SAVE to store the settings to the current PRESET.

Tips

Tom MIDI notes (head / rim): Tom 1 = 48/87, Tom 2 = 45/88, Tom 3 = 43/89, Tom 4 = 41/90.
The SENSITIVITY table covers SN, T01–T03, BD, HH, CR and RD — the TOM4 expansion channel is not listed.
On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.

T950 13"x13" Floor Tom also fits 76 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

Lekato

Lekato PD708

Millenium

Millenium MPS-1000

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.