Support

T950 13"x13" Floor Tom on Roland TD-27

Wiring, module settings, and tips for the T950 13"x13" Floor Tom when used with the Roland TD-27.

Yes — the T950 13"x13" Floor Tom works as a full tom on the Roland TD-27: head + rim.

Head Rim

Wiring: TOM1, TOM2, TOM3 connectors on the DB-25 cable snake → one per tom pad

Dual-zone tom triggering: head (tip) and rim (ring) are read over the one lead per tom input.

Snare and tom setup and troubleshooting guide ›

Cable routing

Plug the TOM1, TOM2, or TOM3 connector on the DB-25 cable snake into each tom pad.

Snare and tom setup and troubleshooting guide ›

Module settings

Press [SYSTEM], select "TRIGGER" and press [ENTER], then select "BANK" and press [ENTER] to open the TRIGGER BANK screen.
Strike a tom (display shows "T1"-"T3") or use the cursor buttons to select the TOM1, TOM2, or TOM3 input.
Use the dial to set the Trig Type to the model that matches your tom pad.
Back on the TRIGGER MENU, open "PARAM", select the tom, then set Sensitivity from the cursor + dial.

Tips

Head triggers from the center piezo, rim from a second piezo mounted under the head.
On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.

T950 13"x13" Floor Tom also fits 76 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

Lekato

Lekato PD708

Millenium

Millenium MPS-1000

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.