Support

15" Dual-Zone China on Roland V71

Wiring, module settings, and tips for the 15" Dual-Zone China when used with the Roland V71.

Yes — the 15" Dual-Zone China works as a full 2-zone crash on the Roland V71: bow + edge.

Bow Edge

Wiring: 1× TRS → CRASH1 or CRASH2 input on the rear panel

Dual-zone crash triggering: bow (tip) and edge (ring) respond independently via the single TRS connection. Choke works by grabbing the cymbal edge. The V-71 supports Roland CY-series 2-zone cymbals.

Cable routing

Connect a ¼″ TRS cable from the cymbal to the CRASH1 or CRASH2 input on the rear panel.

Module settings

Press the [TRIGGER] button.
Press the [F1] (BANK) button to open the TRIGGER - BANK screen.
Select the CRASH1 or CRASH2 input (strike the pad or use the cursor buttons).
Use the [-] [+] buttons or the dial to set the trigger type to the model that most closely matches your connected pad (the full trigger-type list is in the module's Data List).
For finer control, press [F3] (BASIC) and adjust Sensitivity on the TRIGGER - BASIC screen.

Tips

Bow and edge zones respond independently.
Choke works by grabbing the cymbal edge.
The DIGITAL TRIGGER IN jacks are for Roland digital pads (CY-18DR) only.

15" Dual-Zone China also fits 73 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.