Support
15" Dual-Zone China on Donner Beat Max
Setup — 15" Dual-Zone China on Donner Beat Max
WorksYes — the 15" Dual-Zone China works as a full 2-zone crash on the Donner Beat Max: bow + edge.
Bow
Edge
Wiring: Via the stand's built-in snake — the Beat Max has no per-pad 1/4" trigger jacks, and the manual documents no pad-end connector
Both crash inputs are dual-zone — bow and edge register as separate sounds.
Crash setup and troubleshooting guide ›Cable routing
- The Donner Beat Max module has no individual 1/4" pad-trigger jacks. Every pad connects through the drum stand's built-in snake, which terminates in a single multi-pin "Module data base socket" on the module.
- The manual documents no connection point for a standard 1/4" pad: panel item 10 is a "Module data base socket" that carries "signals/lights and other data from the drum pad", is built into the stand, and takes the module itself — not a pad. Check how your kit's own pads terminate at the stand before ordering.
Module settings
- From the main interface, tap EDITOR.
- With CHASE ON (default), strike the crash to select it — or turn CHASE OFF and pick it from the drum drop-down.
- Set Model to D_CY10 (10"), D_CY12ST (12" standard), or the size that matches your cymbal.
- Adjust Pad Sensitivity (bow zone), Rim Sensitivity (edge zone), Threshold, and XTalk.
Tips
- Crash MIDI notes — Crash 1: Bow = 27, Edge/Crash = 49; Crash 2: Bow = 31, Edge/Crash = 57.
15" Dual-Zone China also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71