Official US store Free shipping Bundle & Save up to 20%
Lemon

Support

15" Dual-Zone China on NUX DM-310H

Wiring, module settings, and tips for the 15" Dual-Zone China when used with the NUX DM-310H.

Setup — 15" Dual-Zone China on NUX DM-310H

Works

Yes — the 15" Dual-Zone China works as a full 2-zone crash on the NUX DM-310H: bow + edge.

Bow Edge

Wiring: 1× TRS → Crash 1 / Crash 2 branch on the multi-pin trigger snake, or the rear-panel TRIGGER expansion jack

Dual-zone crash: bow and edge respond independently over one TRS. The DM-310H has two crash branches on the snake plus a dedicated TRIGGER expansion jack (set PAD TYPE to CYMBAL).

Cable routing

  1. Plug the Lemon crash into a CRASH 1 or CRASH 2 branch of the trigger snake.
  2. For an extra cymbal, use the rear-panel TRIGGER jack and set its PAD TYPE to CYMBAL.

Module settings

  1. Press the MENU button, use − / + to select TRIGGER, and press ENTER.
  2. Press ENTER to switch between parameters and use − / + to set each value.
  3. Set SENSITIVITY and THRESHOLD for the bow, and RIM GAIN for the edge zone.
  4. If a nearby pad cross-triggers the crash, raise XTALK CANCEL.
  5. Only when the crash is on the rear-panel TRIGGER expansion jack, set PAD TYPE to CYMBAL (PAD TYPE has no effect on the harness CRASH inputs).
  6. Press RETURN to exit.

Tips

  1. Bow and edge respond independently.
  2. XTALK CANCEL helps if a nearby pad cross-triggers the cymbal.
15" Dual-Zone China also fits 73 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Donner

Efnote

GEWA

NUX

Pearl

Roland

Simmons

Yamaha

Support contact

Have a question? Read the FAQ. Need manual help? Email support.