Support
Setup for your NUX DM-310H
Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the NUX DM-310H, with the limitations noted below.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 2-zone
- Ride 2-zone
- Hi-hat Continuous
Module snapshot
- Brand
- NUX
- Model
- DM-310H
- Also known as
- DM-310H, DM310H, DM-310 H
Setup details by role
Snare pad 2-zone 1× TRS → Snare branch on the multi-pin trigger snake
Dual-zone snare: head and rim/cross-stick respond independently over one TRS connection (tip = head, ring = rim).
Tom pad 2-zone 1× TRS per tom → Tom 1 / Tom 2 / Tom 3 branch on the multi-pin trigger snake
Dual-zone toms: head and rim respond independently over one TRS connection per tom (the manual shows both a head shot and a rim click).
Kick pad Works 1× TS or TRS → Kick branch on the multi-pin trigger snake
Single-zone kick trigger via the snake's Kick branch.
2-zone crash 2-zone 1× TRS → Crash 1 / Crash 2 branch on the multi-pin trigger snake, or the rear-panel TRIGGER expansion jack
Dual-zone crash: bow and edge respond independently over one TRS. The DM-310H has two crash branches on the snake plus a dedicated TRIGGER expansion jack (set PAD TYPE to CYMBAL).
3-zone ride 2-zone 1× TRS: Ride 1 (bow/edge) → Ride branch on the multi-pin trigger snake
Plug the Lemon ride's Ride 1 cable into the Ride branch for bow + edge with choke. The DM-310H 14" ride input is 2-zone per NUX's own spec — no cymbal modification.
Hi-hat Continuous 1× TRS (pad) → Hi-Hat branch + 1× TRS (pedal) → Hi-hat Control branch on the multi-pin trigger snake
Continuous hi-hat. The DM-310H reads three pedal stages — closed, half-open, and fully open — via its HIHAT SET menu (HH SENS, HH OPEN VAL, HH CLOSE VAL). NUX's variable hi-hat sensing isn't documented as Roland VH/FD-compatible, so calibrate the pedal range with HH OPEN VAL / HH CLOSE VAL after connecting.
