Support
Setup for your Donner DED-200X
Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Donner DED-200X, with the limitations noted below.
- Snare 2-zone
- Toms 1-zone
- Kick 1-zone
- Crash 2-zone
- Ride 2-zone
- Hi-hat Switch (open/closed)
Module snapshot
- Brand
- Donner
- Model
- DED-200X
- Also known as
- DED200X, DED-200X
Setup details by role
Snare pad 2-zone 1× TRS → Snare connector on the cable harness
The DED-200X shares the DED-200 electronics; the snare channel is dual-zone — the head and the rim/sidestick trigger as separate MIDI notes. Pads connect through a labeled multi-pin harness that plugs into the module's parallel (DB25) trigger port.
Tom pad 1-zone 1× TRS per tom → Tom1, Tom2, Tom3 connectors on the cable harness
The DED-200X tom inputs are single-zone (same as DED-200). Only the head zone will trigger; rim hits will not produce a separate sound.
Kick pad Works 1× TS or TRS → Kick connector on the cable snake
Single-zone kick trigger via the cable snake. Only the head zone is active.
2-zone crash 2-zone 1× TRS → Crash connector (via cable snake) or Crash 2 jack (1/4" TRS, rear panel)
Same specifications as the DED-200. Connect to Crash connector on the cable snake or Crash 2 jack on rear panel.
3-zone ride 2-zone 1× TRS: Ride 1 (bow/edge) → Ride input
Plug the Lemon ride's Ride 1 cable into the Ride input for bow + edge — no cymbal modification. The DED-200X has no ride-bell voice, so bow + edge is the full 2-zone ride it can drive.
Hi-hat Open/Closed 1× TRS pad + pedal switch → module via the DB25 signal-connection cable
Basic open/closed pedal switching. No continuous control. Same as DED-200.
