Free Shipping on All Orders
Lemon

Support

T950 20"x12" Kick Drum on ATV xD-3

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the ATV xD-3.

Setup — T950 20"x12" Kick Drum on ATV xD-3

Works

The T950 20"x12" Kick Drum is fully supported on your ATV xD-3.

Trigger

Wiring: 1× TS or TRS → KICK input (1/4" TRS jack)

Single-zone kick trigger. Only the head zone is active.

Cable routing

  1. Connect a 1/4" TS or TRS cable from the kick pad to the KICK input on the rear panel.

Module settings

  1. Refer to xD-3 manual for trigger settings. Adjust Sensitivity, Threshold, and Crosstalk for the Kick input.

Tips

  1. Single-zone operation — only the head zone is active.
  2. A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).