Free Shipping on All Orders
Lemon

Support

18" Triple-Zone Crash/Ride on Alesis Prime

Wiring, module settings, and tips for the 18" Triple-Zone Crash/Ride when used with the Alesis Prime.

Setup — 18" Triple-Zone Crash/Ride on Alesis Prime

Works

The 18" Triple-Zone Crash/Ride is fully supported on your Alesis Prime.

Bow Edge

Wiring: 1× TRS → C1, C2, C3, or C4 input

Four individual ¼″ TRS crash inputs on the rear panel. Trigger presets library available for quick setup. Choke supported.

Cable routing

  1. Connect a ¼″ TRS cable from the cymbal to the C1, C2, C3, or C4 input on the rear panel.

Module settings

  1. Go to Kit → Trigger Edit on the touchscreen. Tap the cymbal input to select it.
  2. Choose a trigger preset from the library, or go to the Tweaks tab to adjust manually.
  3. Set Bow Sensitivity (1.0–32.0), Edge Sensitivity, Threshold, and Curve.

Tips

  1. Advanced settings include Scan Time, Mask Time, Edge Decay Boost, and Choke Time.
  2. Invert Bell & Edge option is available if zones are swapped.
  3. Trigger presets can speed up setup — start with a cymbal preset and fine-tune from there.