Free Shipping on All Orders
Lemon

Support

18" Triple-Zone Crash/Ride on Alesis Crimson III

Wiring, module settings, and tips for the 18" Triple-Zone Crash/Ride when used with the Alesis Crimson III.

Setup — 18" Triple-Zone Crash/Ride on Alesis Crimson III

Works

The 18" Triple-Zone Crash/Ride is fully supported on your Alesis Crimson III.

Bow Edge

Wiring: 1× TRS → Crash 1 connector on the cable snake, or 1× TRS → Crash 2 jack on the rear panel

Same platform as the Crimson II. Crash 1 is on the cable snake (TRS). Crash 2 is a ¼″ TRS jack on the rear panel. Both support 2-zone operation.

Cable routing

  1. Connect a ¼″ TRS cable from the cymbal to the Crash 1 connector on the cable snake.
  2. Alternative: Connect a ¼″ TRS cable from the cymbal to the Crash 2 jack on the rear panel.

Module settings

  1. Go to Kit → Menu → Trigger. Select the Crash input.
  2. Adjust Sensitivity, Threshold, Curve, and Rim Sens.
  3. Set Head-Rim Adj to balance bow and edge response.

Tips

  1. Xtalk parameter can reduce false triggers from nearby pads.
  2. Retrig Cancel helps prevent double triggering on hard strikes.