Support
T950 20"x12" Kick Drum on Alesis CORE
Setup — T950 20"x12" Kick Drum on Alesis CORE
WorksThe T950 20"x12" Kick Drum is fully supported on your Alesis CORE.
Trigger
Wiring: 1× TS or TRS → KICK input (1/4" TRS jack)
Single-zone kick trigger. Only the head zone is active.
Cable routing
- Connect a 1/4" TS or TRS cable from the kick pad to the KICK input on the rear panel.
Module settings
- Go to Kit → Trigger Mode. Select the Kick input.
- Choose a factory trigger preset or adjust Sensitivity and Threshold manually.
Tips
- Single-zone operation — only the head zone is active.
- A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).