Free Shipping on All Orders
Lemon

Support

T550 12" Kick on Alesis CORE

Wiring, module settings, and tips for the T550 12" Kick when used with the Alesis CORE.

Setup — T550 12" Kick on Alesis CORE

Works

The T550 12" Kick is fully supported on your Alesis CORE.

Trigger

Wiring: 1× TS or TRS → KICK input (1/4" TRS jack)

Single-zone kick trigger. Only the head zone is active.

Cable routing

  1. Connect a 1/4" TS or TRS cable from the kick pad to the KICK input on the rear panel.

Module settings

  1. Go to Kit → Trigger Mode. Select the Kick input.
  2. Choose a factory trigger preset or adjust Sensitivity and Threshold manually.

Tips

  1. Single-zone operation — only the head zone is active.
  2. A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).