Free Shipping on All Orders
Lemon

Support

20" Triple-Zone Crash/Ride on Alesis CORE

Wiring, module settings, and tips for the 20" Triple-Zone Crash/Ride when used with the Alesis CORE.

Setup — 20" Triple-Zone Crash/Ride on Alesis CORE

Works

The 20" Triple-Zone Crash/Ride is fully supported on your Alesis CORE.

Bow Edge

Wiring: 1× TRS → C1, C2, C3, or C4 input

Individual ¼″ TRS crash inputs on the rear panel. Same architecture as the Prime. 60+ factory trigger presets available.

Cable routing

  1. Connect a ¼″ TRS cable from the cymbal to the C1, C2, C3, or C4 input on the rear panel.

Module settings

  1. Go to Kit → Trigger Mode. Select the cymbal input.
  2. Choose a factory trigger preset or adjust Sensitivity (1.0–32.0) and Threshold manually.

Tips

  1. Start with a factory cymbal trigger preset and fine-tune from there.
  2. Choke is supported on crash inputs.